How to set up your Lift Kit Planter Insert

  1. Start with the black (or lime green) disk. This is the base or bottom disk.
  2. For the lime green disk, put the pole into the hub, push the spring button pin in and twist until it pops into the hub hole. For the black disk, twist the threaded end of the pole into the threaded hub until it is as far as it can go. 
  3. Take the dark green (top disk) and slide the pole into the hub underneath. Twist the pole so the top pin locks into the hole in the hub. 
  4. Push the spring button pin in and move it up or down to fit your height needs.
  5. The Lift Kit is now ready to use!